BendPak HDS-14LSX 14,000-lb. Capacity Alignment, Extended Lift

To view the lift inspection guide Click Here.

Alignment Lift System Offers 14,000 lbs. of Pure Lifting

BendPak's HDS-14LSX alignment lift is engineered to meet the strenuous demands of your toughest professional lifting jobs. Designed into the HDS-14LSX alignment lift is a long list of crucial features that improve safety, durability and productivity, ensuring your BendPak is the absolute best car lift you can buy.

This is the sturdy beast you want as the backbone of your shop, especially if you service large, low ground-clearance vehicles. Our alignment system features front turn plates and rear slip plates built right into the runways. The wheels always respond to your adjustments with no resistance or hassle. We call it “free-floating.” You’ll find it unbelievably easy.

Slip plates
Multi-caster slip plates in the back and turn plates in the front allow for extremely precise, free-floating alignment.

Turn plates
Dual, recessed turn plate pockets allow you to position the corrosion-resistant, galvanized turn plates in the location best suited for individual vehicle positioning. These turn plates provide more clearance for equipment installations.

Dual-hub cable sheaves
This BendPak alignment lift comes standard with robust 10.5” diameter cable sheaves within the runway and cross tubes and 2.25” diameter sheave axles that are equally durable. Both contribute to the longevity and low-maintenance cost of owning and operating your lift.

Heavy-duty aircraft cable
A 1/2” diameter 6 x 25 aircraft-quality stainless-steel lifting cable runs through each of the four columns. Designed for non-stop use and totally resistant to rubbing and other abrasions (e.g., weather, chemicals, hydraulic oil).

Adjustable height locking positions
Get your alignment lift to just the right height. No need to reach or bend for the turn plates, as every few inches, each post column features a lock position for your convenience.

Built-in lubrication
Grease fittings are included on every BendPak lift, so you can focus on the alignment of your wheels without worrying about the lubrication of your cable sheaves. BendPak makes it easy to keep an eye on your grease nipples, which only require periodic maintenance. Just peek inside the structure before, during or after using your alignment lift to see how the fittings are doing.

Flow restrictor
In the extremely unlikely event of a hose rupture, BendPak’s unique hydraulic flow divider provides a safe, even descent, thus keeping your alignment lift structure safe and ready to go after you address the situation. We highly doubt you will ever encounter this situation with your lift.

Spring-loaded safety locks
As the alignment lift rises to your preferred service level, springs engage the locks into place at each ladder position. The adjustable nature of the spring-loaded, multi-locking structure offers you the comfort of knowing that you’re safe to lift, even if there’s a slight slope in your garage.

Push-button pneumatic lock release
A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders provide years of trouble-free service.

Secondary lock system
A slack-cable lock is your backup safety mechanism that’s ready at all times to shut off the alignment lift in the event of dangerous cable slack.

Integrated design
All cables, sheaves and airlines, as well as the single hydraulic cylinder, run internally through the lift structure. This optimizes aesthetics and safety in way that has come to define the BendPak brand.

Electric-hydraulic power system
No maintenance necessary! The electric-hydraulic power system features ergonomically located controls for easy operator access during repetitive daily use.

Non-skid runways
Even if your alignment lift runways get wet or oil-stained, your vehicles will rotate on the turn plates without slipping off the ramps. The runway surface is rugged enough to hold vehicles, no matter what other pushing, bumping and other craziness occurs in the shop.

Longer approach ramps
Longer ramps make it easier to load low ground-clearance vehicles onto the car lift structure. Alignments on these vehicle types are no hassle, and of course, larger vehicles can glide on just as easily.

Flexible protective conduit
An extra-tough yet flexible conduit protects all airlines and hydraulic hoses from daily wear. Your alignment lift is safer and operations can be handled more confidently when you know your cables won’t deliver sudden, unfortunate electric shocks, ruptures or fluid leaks.

Optional Rolling bridge jacks
Optional rolling jacks make a great addition to increase service capacity. Bridge jacks raise the front or back of vehicles, so wheel and brake service can be performed without moving to a two-post lift or scissor lift. Use two jacks to raise the entire car. Telescoping arms and frame contact pads extend over runways and target the vehicle frame’s lifting points. Runways are fully adjustable for different tread widths. Three locking positions offer additional operator control.

Choose extended frames
The HDS14LSXE is designed for extended-length vehicles, such as trucks and vans. The runways and overall length are extended by 30”. With runways now 229” in length, some very long vehicles can fit easily on the car lift. If your service bay demands these vehicle types, an extended length alignment lift is absolutely necessary to perform wheel alignments.

14,000 pound lifting capacity
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
Two runway lengths to choose
Heavy‐duty turn plates and integrated rear slip‐plates included
Multi‐position turn plate pockets
Automatic leveling system
Multiple auto-leveling locking positions
Runways include rail‐kit for optional accessories
Electric / hydraulic power system
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks, and sheaves
Internal "Anti-Sway" slider blocks in each column
Features oversize sheaves and heavy‐duty 1/2” aircraft cable
Rugged 1‐3/8" roller axles and oversize self‐lubricating cable sheaves
Multi‐position safety locks in each column with push‐button safety release
Runways adjust for different tread widths and feature non‐skid surface
Optional 7,000 pound capacity bridge jacks available (Model RBJ7000)

Model	HDS-14LSX
Capacity
Lifting Capacity: (*)	14,000 lbs. (6,350 kg)
*Max Capacity / Front Axle	7,000 lbs. (3,175 kg)
*Max Capacity / Rear Axle	7,000 lbs. (3,175 kg)
Rise
A - Min. Runway Height	7.625" (194 mm)
B - Max. Rise	70" (1,778 mm)
C - Max. Lifting Height	77.625" (1,972 mm)
Time to Full Rise	60 seconds
Outside Dimensions
D - Overall Width	130" (3,302 mm)
E - Outside Length	213" (5,410 mm)
F - Overall Length	241" (6,121 mm)
G - Height of Columns	95" (2,413 mm)
Inside Dimensions
H - Width Between Columns	120" (3,048 mm)
I - Drive-Thru Clearance	98" (2,489 mm)
Runways
J - Runway Width	20" (508 mm)
K - Length of Runways	199" (5,055 mm)
L - Width Between Runways	37.5" (953 mm) or 51" (1,295 mm)
Alignment
M - Min. 4-Wheel Alignment	89" (2,261 mm)
N - Max 4-Wheel Alignment	156" (3,962 mm)
O - Max 2-Wheel Alignment	182" (4,623 mm)
Minimum Wheelbase
Rated Capacity	140" (3,556 mm)
75% Capacity	120" (3,048 mm)
50% Capacity	100" (2,540 mm)
25% Capacity	80" (2,032 mm)
Locking
Locking Positions	13
Lock Spacing	4
Power Unit
Motor	220 VAC / 60 Hz / 1 Ph
Noise	45 dB
Shipping
Dimensions	209" x 23" x 42" (5,308 mm x 584 mm x 1,066 mm)
Weight	3,067-lbs. (1,391 kg)

Note - An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Note - Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list.

Click on Image to Enlarge or Download It

BendPak 521 Warranty

Better Products – Better Service – Better Value

LIMITED WARRANTY. Subject to the limitations of set forth below, Warrantor warrants that the Product sold hereunder conform to Warrantor'spublished specifications. WARRANTOR MAKES NO REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESS OR IMPLIED, WITH RESPECT TOTHE GOODS, WHETHER AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

Five Years (60-Months) Warranty on the lift structure
Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
One Year (12-Months) Warranty on operating components
One Year (12-Months) Warranty on electrical components (excluding power unit)
One Year (12-Months) Labor Warranty on site or at factory*
One Year (12-Months) Free-Shipping** on ground-freight charges related to warranty performance

Limited Warranty

Who gives this warranty (Warrantor): BendPak Inc., 1645 lemonwood dr. Santa Paula, CA 93060
Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
What products are covered by this warranty: Any BendPak Two-Post or Four-Post car lift***
What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
What is not covered under this warranty:
- Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
- Any damage caused by overloading Product beyond rated capacity
- Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
- Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
- Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
- Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
- Rusted components due to improper maintenance or corrosive environments
- Cosmetic defects that do not interfere with product functionality
- Damage due to incorrect voltage or improper wiring
- Any failure that results from improper installation or use not according to specifications
- Damage caused by disasters such as fire, flood, wind, and lightning
- Damage caused by unauthorized attachments or modifications
Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
Responsibilities of Purchaser under this warranty:
- Provide dated proof of purchase and maintenance records
- In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
- Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
- Immediately upon receipt of the Product, Purchaser shall inspect the same. Any claim for shortage must be made within ten days after Purchaser's receipt. All other claims, including claims for alleged defective Product, must be made within fifteen days after Purchaser learns of the facts upon which such claim is based, but in no event later than the applicable one, two or five year period specified above for the specified component(s). All claims not made in writing and received by Seller within the time periods specified above shall be deemed waived. With respect to any defects incapable of discovery until in use, all claims for anydamages or losses as a result of such defects shall be deemed waived unless made in writing and received by Seller within fifteen days after Purchaser learns of the alleged defect giving rise to the claim and after the expiration of said periods, but in no event later than the applicable one, two or five year period specified above for the specified component(s). Purchaser expressly assumes all liability for all such damages or losses, irrespective of any use which shall have taken place or whether the alleged defect shall have occurred or been discovered prior to expiration of such periods.
When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.

*As determined by Warrantor in its sole discretion**Free-shipping applies to direct shipping points within the 48 continental United States.Rural area shipping surcharge may apply for remote addresses. ***For all BendPak brand Two-Post or Four-Post Vehicle Service Lifts(excluding specialty lifts, high rise, commercial parking, material handling, or models for particular purpose) manufactured on or following1/1/2011.

https://bendpakcs.freshdesk.com/a/tickets/new