BendPak VMP-7580V-603 V-MAX Patriot 7.5HP 80 Gallon Air Compressor

Up your air game with the powerful, 3-phase V-Max Patriot 7580V-603 air compressor from BendPak. V-Max Patriot air compressors meet and exceed your air system needs with high-efficiency technology and unrivaled quality. Made in USA.

The Next Stage in Air Compressor Evolution

Meet the V-Max Patriot 7580V-603, 3-phase air system. Like every member of the V-Max Patriot family, the 7580V-603 features the rugged V-Max, four-cylinder pump designed for extreme duty and maximum efficiency under all load conditions. The BendPak 7580V-603 is a 2-stage lubricated reciprocating air compressor built with 100% cast-iron pumps to provide the quality and performance required by heavy-use applications like automotive/body repair shops and industrial manufacturing and fleet services.

V-Max Compressor Motor

Every V-Max Patriot pump features splash lubrication for total reliability and a V-4 finned cylinder configuration for 360° cooling. Heavy-duty, disc-type valves do not require a cylinder head removal or other valve maintenance procedure. The large, 100% cast iron V-Max pump puts out an incredible amount of air but with an even more incredible noise reduction. Thanks to the 7580V's slower RPM speeds and two-stage design, this air compressor is much quieter than you'd expect. At the same time, our built‐in intercooler and air‐cooled after-cooler moderate the air temperature, resulting in a significant reduction in both heat and air moisture.

Anti-vibration Pads

This air compressor includes a set of four rugged, half-inch thick pads to ensure there's virtually zero machine vibration during operation. The high-quality elastomer compound resists aging, compression set, water and oil.

Cooling Fan

It's always important to evaluate more than just the initial price of the air compressor unit. The real cost or savings will be found in the price of maintenance and the electricity required to run it. The more air you can produce per horsepower, the less overall power is needed. Thanks to their massive energy-efficient pumps, V-Max Patriot air compressors run at notably slower speeds to achieve low operating temperatures, thereby maximizing compressor efficiency. Even a casual glance will quickly reveal that the monstrous V-Max Patriot pump outpaces the competition every time in terms of efficiency, reliability and longevity. In other words, nothing comes close to the value of a V-Max Patriot air compressor.

• Made in USA
• UL, CSA, ASME certified
• 7.5 HP energy-efficient motor
• Extra-quiet, low-RPM pump
• Cast-iron V-Max Patriot pump features simple splash lubrication for total reliability and a "V-4" finned cylinder configuration that provides 360° cooling
• Proven air-cooled design is economical, reliable and environmentally friendly
• Two compression rings and one oil control ring provide excellent oil control and high-efficiency air delivery
• Dual drive belts require less belt tension, resulting in less load on pump bearings, longer belt life and low vibration
• Fully-enclosed belt guard
• Cast-iron pump and heads are more stable under heavy workloads and do not warp from heat like aluminum cylinders with pressed-in sleeves
• Anti-vibration pads included
• Large surface area and cooling fins on cylinders and forced-air after-cooler provide efficient heat dissipation for lower operating temperatures and dryer air. Compressor runs cooler, oil life is extended and maintenance is reduced
• Tapered roller main bearings provide full contact and support of the crankshaft, and needle-type piston pin bearings properly distribute bearing loads
• Precision balanced flywheel has forced-air fan blades for optimum compressor cooling and life
• Magnetic starter provides thermal overload protection and minimizes start loads, providing long life and trouble‐free operation
• ASME-rated safety valve protects the compressor from overpressure and safeguards the operator
• Balanced flywheel and counterbalanced crankshaft result in nearly vibration-free operation
• Readily accessible disc-valves do not require disassembly of compressor piping, for easy accessibility and reduced maintenance cost and downtime
• Corrosion-resistant tubing for coolers, separators and valves for longer life and reduced maintenance
• Oversized ductile iron crankshaft provides extra strength and longer wear
• High-density, die-cast aluminum alloy rods minimize reciprocating weight
• Rugged cast iron oil reservoir has convenient sight gauge glass, large oil drain and convenient fill cap
• Automatic pressure switch provides auto start and stop
• Integrated pressure unloader valves are built into the intake valve assembly on the air compressor head, reducing internal pump heat from initial start-up compression
• Pressure gauge with service valve
• Oversize replaceable air filters

AIR COMPRESSORS WARRANTY

Duration: From the date of purchase by original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

• Five Years (60-Months) Warranty on the compressor tank only
• Two Years (24-Months) Warranty on the compressor pump only
• One Year (12-Months) Warranty on operating components
• One Year (12-Months) Labor Warranty on site or at factory
• One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

Limited Warranty

• 1. Who gives this warranty (Warrantor): BendPak Inc., 1645 Lemonwood Dr., Santa Paula, CA 93060
• 2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
• 3. What products are covered by this warranty: Any BendPak Air Compressor
• 4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
• 5. What is not covered under this warranty:
• a. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance withinstructions provided in the owner’s manual(s) supplied or any pre-delivery service, (assembly, oil, lubricants, adjustment etc.)
• b. Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
• c. Items considered general wear parts such as rubber belts, hoses, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship Other items not listed but considered general wear parts; a. Pump wear or valve damage caused by using oil not specified; b. Pump or valve damage caused by any oil contamination or by failure to follow proper oil maintenance guidelines; c. Ring wear or valve damage from inadequate filter maintenance
• d. Any component damaged in shipment or any failure caused by installing or operating air compressor under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
• e. Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
• f. Rusted tanks, including but not limited to rust due to improper drainage or corrosive environments. The five-year tank warranty applies to ASME air receivers only if they are installed on rubber anti-vibration pads or approved equivalent
• g. Cosmetic defects that do not interfere with product functionality
• h. Damage due to incorrect voltage or improper wiring
• i. Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of BendPak Inc. product
• j. All electrical components are guaranteed for one year against defects in workmanship and/or materials when the lift is installedand used according to specifications
• 6. Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
• 7. Responsibilities of Purchaser under this warranty:
• a. Provide dated proof of purchase and maintenance records
• b. In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
• c. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
• 8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.

*Free-shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remoteaddresses.

Limitation of Liability
BendPak/Ranger shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person otherthan an authorized representative of BendPak/Ranger has made any attempt to service or modify the tool prior to its return to BendPak/Ranger under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities underthese terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages. All expressed and implied warranties, including the implied warranties of merchantability and fitness for a particularpurpose, are limited in duration to the coverage period. No warranties, expressed or implied, will apply after this period. BendPak may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on www.bendpak.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.

https://bendpakcs.freshdesk.com/a/tickets/new