CPS AR2700TA10 Semi-Automatic Recovery/Recycle & Recharge

The new semi-automatic machine incorporates ball valves instead of solenoids and checks valves in the recovery and evacuation flow path. Both of these components are susceptible to in-field failure when exposed to foreign contaminants such as aftermarket A/C sealants, loose desiccant, and other particles that cause them to leak or seal closed. The machine can be run with a selectable valve for low, high, or both in recovery, recycling, and recharge mode. The machine comes with a 90lbs tank.

• Semi-Automatic simple to use Recovery, Recycle, Evacuate, and Recharge machine. Built for the working man.
• AR2700TA10: RRR system for large capacity applications, CTA build
• Utilizes manual ball valves in place of solenoids making the AR2700TA10 impervious to contamination and sealants.
• Simple operation for oil waste and air purge.
• Microprocessor-controlled recharge makes the AR2700TA accurate to 1/10 oz or 4 grams.
• Easy to read high and low-pressure gauges.
• High-efficiency 10 CFM vacuum pump & VG200 vacuum gauge
• All steel durable construction.
• The AR2700TA10 can be programmed for 50LB, 90LB, 40 Kilogram tanks.
• Comes with a 90lbs tank
• 115 Volts, 50/60 Hz, Single phase,PSI/KPa gauges.

Includes

• 90 lbs Tank w/Heater

*The AR2700TA and AR2700TA10 do not contain a pump down valve and is meant for single refrigerantoperation. The AR2700M contains a pump down valve for mutiple refrigerant usage. Mixing of refrigerants will cause the user economic loss.

• 1-year warranty