Navigate to the  homepage

OVER 1800 5-STAR REVIEWS
View on Trustpilot

You are here:Home >
MorrHeat
MorrHeat MH160 Waste Oil Heater 160,000 BTU

MorrHeat MH160

MorrHeat MH160 Waste Oil Heater 160,000 BTU - Image 1 of 0
MorrHeat MH160 Waste Oil Heater 160,000 BTU - Image 2 of 0
MorrHeat MH160 Waste Oil Heater 160,000 BTU - Image 3 of 0
MorrHeat MH160 Waste Oil Heater 160,000 BTU - Image 1 of 0
MorrHeat MH160 Waste Oil Heater 160,000 BTU - Image 2 of 0
MorrHeat MH160 Waste Oil Heater 160,000 BTU - Image 3 of 0
MorrHeat MH160 Waste Oil Heater 160,000 BTU - Image 4 of 0
MorrHeat MH160 Waste Oil Heater 160,000 BTU - Image 1 of 0
MorrHeat MH160 Waste Oil Heater 160,000 BTU - Image 2 of 0
MorrHeat MH160 Waste Oil Heater 160,000 BTU - Image 3 of 0
MorrHeat MH160 Waste Oil Heater 160,000 BTU - Image 4 of 0
MorrHeat MH160 Waste Oil Heater 160,000 BTU - Image 5 of 0

MorrHeat MH160 Waste Oil Heater 160,000 BTU

$
This product qualifies for FREE SHIPPING!
Product Code: MH160
Choose your options:
Optional 240V Voltage Available
Optional 240V Voltage Available(optional):
Optional Upgraded Metered Fuel Pump
MFPA(optional):
Optional Upgraded Compressor
OBAC(optional):
Optional Accessory
#CK8(optional):
Optional Tank/Heater Stand
#MHT150(optional):
#MHT250(optional):
#MHT350(optional):
#MHT550(optional):
MorrHeat MH160 Waste Oil Heater

The MH160 160,000 BTU Waste Oil Heater is a compact waste oil heating unit perfect for the smaller 2-4 bay garages and commercial shops. Capable of heating up-to 4000 sq. ft. while consuming less than 1 GPH., it doesn't take much fuel to heat the desired area. This unit features a double pass system designed with a stainless steel heat ex-changer, hinged swing out doors on both sides of the waste oil heater for easy ash removal, burns heating fuels, diesel fuels and used-waste motor oils.

Comes standard with the waste oil burner, on-board air compressor so you don't have to use shop air, fuel pump assembly, room thermostat and draft meter. With the MorrHeat line of waste oil heaters you save on hauling fees associated with waste oil removal, lower your heating bill and overhead through the winter months and increase profits at the same time.

  • Perfect heating unit for the smaller to mid-size garages or shops
  • This small but efficient waste oil heating unit heats up to 4,000 square feet and has an out-put of 130,000 BTU’s
  • Only consuming 1 gallon per our when operating, not much used oil is needed to keep the desired area warm while offering fast recovery times when opening and closing bay doors
  • Easy access to the fire chamber and heat exchangers make it very quick when cleaning or maintaining the MH160 waste oil heater
  • The combination of the MorrHeat waste oil burner and fuel pump assembly make for a very easy install and doesn’t limit the location of the heater according to where the fuel storage tank is in the building
  • When hanging the waste oil heater there are four all thread bolts conveniently located on the top of the heating unit for easy ceiling mounting
  • Burner Assembly - Shop Air System
  • Regulated Fuel Pump with Fuel Regulator
  • Fuel Types: Intended for operation with oil not heavier than ASTM D396 No. 2, used crankcase oil, used automatic transmission fluid (ATF), and used hydraulic fluid

This Item Does Not Contain Any CA Prop 65 Listed Chemicals

SpecificationsMH160
Heater Rating160,000 btu
GPH1
Heating Area4,000 Sq. ft.
Air Flow50′ Ft
CFMs3000
Flue Size8"
Fuel Lines3/8″ Copper Tubing
Fuel TypesIntended for operation with oil not heavier than ASTM D396 No. 2, used crankcase oil, used automatic transmission fluid (ATF), and used hydraulic fluid
System Draft.02 – .06
Air Pressure12 psi
Fuel Pressure4-5 psi
Efficiency83%
Min.Circ Amps / Max Fuse15 amps / 15 amps
Run Amps9.1
Power120/240V (Not Dual V)/ 60HZ/50HZ / 1Ph
Dimensions43" × 40.5" × 45.25"
Weight408 lbs
Best Buy Auto Equipment, Auto Body Shop Equipment & Sup, Temecula, CA
PayPal Logo
Empty Cart